Home/Solid Round Tools/Holemaking/General Application Drills/7/32" Dia, 118 Degree Point, Solid Carbide Drill - 51114
7/32" Dia, 118 Degree Point, Solid Carbide Drill - 51114
SERIES: 101
General Application Drill
7/32" Dia, 118 Degree Point, 7/32" Shank Dia, 3" OAL, 2 Flute, 5xD, Uncoated, Series 101, Solid Carbide Drill - 51114
Series Description | General Application Drill |
---|---|
High Performance | No |
Unit (inch/mm) | inch |
Number of Flutes | 2 |
Primary Workpiece Material | (P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy |
Secondary Workpiece Material | (H) Hardened Materials |
Reach (xD) | 5xD |
Size | 7/32" |
Cutting Diameter (DC) (Decimal Inch) | 0.2188 |
Cutting Diameter (DC) (Fractional Inch) | 7/32 |
Cutting Diameter (DC) (mm) | 5.56 |
Shank Diameter (DCON) (Decimal Inch) | 0.2188 |
Shank Diameter (DCON) (mm) | 5.56 |
Usable Length (LU) (Fractional Inch) | 1-13/32 |
Flute Length (LCF) (Decimal Inch) | 1.7500 |
Flute Length (LCF) (Fractional Inch) | 1-3/4 |
Flute Length (LCF) (mm) | 44.45 |
Overall Length (OAL) (Decimal Inch) | 3.0000 |
Overall Length (OAL) (Fractional Inch) | 3 |
Overall Length (OAL) (mm) | 76.20 |
Shank Length (LS) (Decimal Inch) | 1.2500 |
Shank Length (LS) (Fractional Inch) | 1-1/4 |
Point Angle (Degree) | 118 |
Cutting Diameter (DC) Tolerance (Decimal Inch) | +.00000 / -.00050 |
Cutting Diameter (DC) Tolerance (mm) | +.0000 / -.0127 |
Shank Diameter (DCON) Tolerance (ISO) | h6 |
Shank Type | Straight |
Coolant Option | External Coolant |
Additional Geometry | Right Hand Cut Direction (RHC) |
Helix Angle | Right Spiral |
Helix Angle (Degree) | 20 |
Variable Helix | No |
Center Cutting | No |
Chip Breaker | No |
Number of Margins | 2 |
Shipping Weight | 0.0480 |
Series | 101 |
Weldon Flat | No |
US Stock | 207 |
Shank Length (LS) (mm) | 31.75 |
Shank Diameter (DCON) (Fractional Inch) | 7/32 |
Usable Length (LU) (Decimal Inch) | 1.4062 |
Usable Length (LU) (mm) | 35.72 |
Coating Description | Bright/Uncoated |