#49, 118 Degree Point, Solid Carbide Drill - 57111

SERIES: 101

General Application Drill

#49, 118 Degree Point, 0.0730" Shank Dia, 1-3/4" OAL, 2 Flute, 5xD, Ti-NAMITE-A (AlTiN) Coated, Series 101, Solid Carbide Drill - 57111

Total Available U.S. :20

Series Description	General Application Drill
Unit (inch/mm)	inch
Number of Flutes	2
Primary Workpiece Material	(P) Steel\|(M) Stainless Steel\|(K) Cast Iron\|(N) Non-Ferrous Materials\|(S) High Temp Alloy
Secondary Workpiece Material	(H) Hardened Materials
Reach (xD)	5xD
Size	#49
Cutting Diameter (DC) (Decimal Inch)	0.0730
Cutting Diameter (DC) (mm)	1.85
Cutting Diameter (DC) (Wire)	#49
Shank Diameter (DCON) (Decimal Inch)	0.0730
Shank Diameter (DCON) (mm)	1.85
Usable Length (LU) (Fractional Inch)	45/64
Flute Length (LCF) (Decimal Inch)	0.8750
Flute Length (LCF) (Fractional Inch)	7/8
Flute Length (LCF) (mm)	22.23
Overall Length (OAL) (Decimal Inch)	1.7500
Overall Length (OAL) (Fractional Inch)	1-3/4
Overall Length (OAL) (mm)	44.45
Shank Length (LS) (Decimal Inch)	0.8750
Shank Length (LS) (Fractional Inch)	7/8
Point Angle (Degree)	118
Cutting Diameter (DC) Tolerance (Decimal Inch)	+.00000 / -.00050
Cutting Diameter (DC) Tolerance (mm)	+.0000 / -.0119
Shank Diameter (DCON) Tolerance (ISO)	h6
Shank Type	Straight
Coolant Option	External Coolant
Additional Geometry	Right Hand Cut Direction (RHC)
Helix Angle	Right Spiral
Helix Angle (Degree)	20
Center Cutting	No
Number of Margins	2
Shipping Weight	0.0060
Series	101
US Stock	20
Shank Length (LS) (mm)	22.23
Usable Length (LU) (Decimal Inch)	0.7031
Usable Length (LU) (mm)	17.86
Coating Description	AlTiN (Ti-NAMITE-A)
Double Margins (Yes/No)	No
Flute Type	Spiral

Alternate Products

#49, 118 Degree Point, 0.0730" Shank Dia, 1-3/4" OAL, 2 Flute, 5xD, Uncoated, Series 101, Solid Carbide Drill - 51049

Total Available U.S. :37