Product Image
Product Image
Product Image
Product Image
Product Image
Product Image
Product Image

12.00mm Dia, 5 Flute, Corner Radius End Mill - 47026


SERIES: Z5C
Z-Carb-HPR
12.00mm Dia, 26.00mm LOC, 12.00mm Shank Dia, 0.76mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47026
Feature & Benefits
An ideal balance of helix, indexing, flute depth, rake and relief
Variable indexing for chatter supression and patented edge geometry for shearing and strength
Chatter-free geometry allows deep cutting and high speed machining
Enhanced corner geometry with tight tolerance corner radii
Excels at roughing, ramping, high speed machining and finishing in a variety of materials
U.S. stocked items ship next day
Total Available U.S. :17
Series DescriptionZ-Carb-HPR
High PerformanceYes
End ConfigurationCorner Radius
Tool LengthRegular
Unit (inch/mm)mm
Number of Flutes5
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.4724
Cutting Diameter (DC) (mm)12.00
Shank Diameter (DCON) (Decimal Inch)0.4724
Shank Diameter (DCON) (mm)12.00
Length of Cut (APMX) (Decimal Inch)1.0236
Length of Cut (APMX) (mm)26.00
Overall Length (LF) (Decimal Inch)3.2677
Overall Length (LF) (mm)83.00
Corner Radius (RE) (Decimal Inch)0.0300
Corner Radius (RE) (mm)0.76
Shank Length (LS) (Decimal Inch)2.2441
Non-Cutting Center Diameter (NCD) (Decimal Inch)0.1650
Non-Cutting Center Diameter (NCD) (mm)4.19
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeWeldon (Drive Flat)
Coolant OptionExternal Coolant
Coating DescriptionTM (Ti-NAMITE-M)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)37
Variable HelixNo
Center CuttingNo
Chip BreakerNo
DIN Standard (Shank)DIN 6535 HB
Shipping Weight0.2660
SeriesZ5C
Weldon FlatYes
US Stock17
Shank Length (LS) (mm)57.00

Alternate Products

12.00mm Dia, 5 Flute, Corner Radius End Mill - 47018
12.00mm Dia, 26.00mm LOC, 12.00mm Shank Dia, 0.76mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47018
U.S. stocked items ship next day
Total Available U.S. :21
12.00mm Dia, 5 Flute, Corner Radius End Mill - 47129
12.00mm Dia, 26.00mm LOC, 12.00mm Shank Dia, 0.76mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47129
U.S. stocked items ship next day
Total Available U.S. :4
12.00mm Dia, 5 Flute, Corner Radius End Mill - 47126
12.00mm Dia, 26.00mm LOC, 12.00mm Shank Dia, 0.76mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47126
U.S. stocked items ship next day
Total Available U.S. :0
12.00mm Dia, 5 Flute, Corner Radius End Mill - 47162
12.00mm Dia, 26.00mm LOC, 12.00mm Shank Dia, 0.76mm Radius, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47162
U.S. stocked items ship next day
Total Available U.S. :0
12.00mm Dia, 5 Flute, Corner Radius End Mill - 47163
12.00mm Dia, 26.00mm LOC, 12.00mm Shank Dia, 0.76mm Radius, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47163
U.S. stocked items ship next day
Total Available U.S. :0
This site uses cookies to improve your experience. By clicking, you agree to our Privacy Policy.