Product Image
Product Image
Product Image
Product Image
Product Image
Product Image
Product Image

10.00mm Dia, 5 Flute, Corner Radius End Mill - 47530


SERIES: Z5C
Z-Carb-HPR
10.00mm Dia, 30.00mm LOC, 10.00mm Shank Dia, 2.50mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47530
Feature & Benefits
An ideal balance of helix, indexing, flute depth, rake and relief
Variable indexing for chatter supression and patented edge geometry for shearing and strength
Chatter-free geometry allows deep cutting and high speed machining
Enhanced corner geometry with tight tolerance corner radii
Excels at roughing, ramping, high speed machining and finishing in a variety of materials
U.S. stocked items ship next day
Total Available U.S. :0
Series DescriptionZ-Carb-HPR
High PerformanceYes
End ConfigurationCorner Radius
Tool LengthLong
Unit (inch/mm)mm
Number of Flutes5
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.3937
Cutting Diameter (DC) (mm)10.00
Shank Diameter (DCON) (Decimal Inch)0.3937
Shank Diameter (DCON) (mm)10.00
Length of Cut (APMX) (Decimal Inch)1.1811
Length of Cut (APMX) (mm)30.00
Overall Length (LF) (Decimal Inch)2.9528
Overall Length (LF) (mm)75.00
Corner Radius (RE) (Decimal Inch)0.0984
Corner Radius (RE) (mm)2.50
Non-Cutting Center Diameter (NCD) (Decimal Inch)0.1380
Non-Cutting Center Diameter (NCD) (mm)3.51
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0016
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.040
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeStraight
Coolant OptionExternal Coolant
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)37
Variable HelixNo
Center CuttingNo
Chip BreakerNo
Shipping Weight0.1560
SeriesZ5C
Weldon FlatNo
US Stock0
Coating DescriptionTM (Ti-NAMITE-M)

Alternate Products

10.00mm Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 47531
10.00mm Dia, 30.00mm LOC, 10.00mm Shank Dia, 2.50mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 47531
U.S. stocked items ship next day
Total Available U.S. :0
10.00mm Dia, 5 Flute, Corner Radius End Mill - 47528
10.00mm Dia, 30.00mm LOC, 10.00mm Shank Dia, 2.50mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47528
U.S. stocked items ship next day
Total Available U.S. :0
10.00mm Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 47529
10.00mm Dia, 30.00mm LOC, 10.00mm Shank Dia, 2.50mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 47529
U.S. stocked items ship next day
Total Available U.S. :0
This site uses cookies to improve your experience. By clicking, you agree to our Privacy Policy.