b'FRACTIONALM3B3xD30 POS15 3LFAPMXM3B3xDDC DCON TOLERANCES(inch)FRACTIONAL SERIES RE .010.120DIAMETERDC=+0.000/0.001 Three flute designinch EDP NO. DCON = h 6features improved chipCUTTING SHANK LENGTH OVERALLspace over four flutesDIAMETER DIAMETEROF CUTLENGTH UNCOATEDTI-NAMITE-Aand increased strengthDC DCON APMX LF (AlTiN)STEELSand feed capability over0.0101/8 0.030 1-1/2 01433 04388two flutes. STAINLESS STEELS Proprietary coating0.0111/8 0.033 1-1/2 01434 04389allows for superior chip0.0121/8 0.036 1-1/2 01435 04390 CAST IRONflow, driving industry leading productivity0.0131/8 0.039 1-1/2 01436 04391 HIGH TEMP ALLOYSand value, even at low0.0141/8 0.042 1-1/2 01437 04392 TITANIUMspindle speeds. 0.0151/8 0.045 1-1/2 01438 04393 High performanceHARDENED STEELScarbide substrate0.0161/8 0.048 1-1/2 01439 04394designed specifically for Micro Tool applications. 0.0171/8 0.051 1-1/2 01440 04395 NON-FERROUS Broad portfolio, offering0.0181/8 0.054 1-1/2 01441 04396 PLASTICS/COMPOSITESconsistent lengths of cut,0.0191/8 0.057 1-1/2 01442 04397to ensure application demands are met. 0.0201/8 0.060 1-1/2 01443 04398 Advanced geometries0.0211/8 0.063 1-1/2 01444 04399that extend tool life, reduce chatter, cut cycle0.0221/8 0.066 1-1/2 01445 04400times, and improve part0.0231/8 0.069 1-1/2 01446 04401quality. 0.0241/8 0.072 1-1/2 01447 04402 All tools in stock to meet customer order0.0251/8 0.075 1-1/2 01448 04403requirements. 0.0261/8 0.078 1-1/2 01449 04404 All micro tools are manufactured in0.0271/8 0.081 1-1/2 01450 04405accordance with the0.0281/8 0.084 1-1/2 01451 04406KSPT ISO certified quality procedures. 0.0291/8 0.087 1-1/2 01452 044070.0301/8 0.090 1-1/2 01453 044080.0311/8 0.093 1-1/2 01454 044090.0321/8 0.096 1-1/2 01455 044100.0331/8 0.099 1-1/2 01456 044110.0341/8 0.102 1-1/2 01457 044120.0351/8 0.105 1-1/2 01458 044130.0361/8 0.108 1-1/2 01459 044140.0371/8 0.111 1-1/2 01460 044150.0381/8 0.114 1-1/2 01461 044160.0391/8 0.117 1-1/2 01462 044170.0401/8 0.120 1-1/2 01463 044180.0411/8 0.123 1-1/2 01464 044190.0421/8 0.126 1-1/2 01465 044200.0431/8 0.129 1-1/2 01466 04421RE = 1/2 Cutting Diameter (DC) continued on next page54 END MILLS END MILLSwww.sgsmicrotools.com'