Home/Solid Round Tools/Milling/General Application End Mills/1/8" Dia, 3 Flute, Tapered (Ball) End Mill - 32409
1/8" Dia, 3 Flute, Tapered (Ball) End Mill - 32409
SERIES: 24B
General Application End Mill
1/8" Dia, 1" LOC, 1/4" Shank Dia, 3 Flute, 28 Degree Helix, Ti-NAMITE (TiN) Coated, Series 24B, Tapered (Ball) End Mill - 32409
Series Description | General Application End Mill |
---|---|
High Performance | No |
End Configuration | Tapered (Ball) |
Unit (inch/mm) | inch |
Number of Flutes | 3 |
Primary Workpiece Material | (P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy |
Secondary Workpiece Material | (H) Hardened Materials |
Shank Diameter (DCON) (Decimal Inch) | 0.2500 |
Shank Diameter (DCON) (mm) | 6.35 |
Length of Cut (APMX) (Decimal Inch) | 1.0000 |
Length of Cut (APMX) (Fractional Inch) | 1 |
Length of Cut (APMX) (mm) | 25.40 |
Overall Length (LF) (Decimal Inch) | 3.0000 |
Overall Length (LF) (Fractional Inch) | 3 |
Overall Length (LF) (mm) | 76.20 |
Shank Length (LS) (Decimal Inch) | 2.0000 |
Shank Length (LS) (Fractional Inch) | 2 |
Cutting Diameter (DC) Tolerance (Decimal Inch) | +0.0000/-0.0020 |
Cutting Diameter (DC) Tolerance (mm) | +0.000/-0.050 |
Shank Diameter (DCON) Tolerance (ISO) | h6 |
Corner Radius (RE) Tolerance (Decimal Inch) | +0.0005/-0.0010 |
Corner Radius (RE) Tolerance (mm) | +0.013/-0.025 |
Shank Type | Straight |
Coolant Option | External Coolant |
Additional Geometry | Right Hand Cut Direction (RHC) |
Rake Angle | Positive |
Side Profile | Linear Taper |
Helix Angle | Right Spiral |
Helix Angle (Degree) | 28 |
Variable Helix | No |
Center Cutting | Yes |
Chip Breaker | No |
Shipping Weight | 0.0670 |
Series | 24B |
Weldon Flat | No |
US Stock | 0 |
Shank Length (LS) (mm) | 50.80 |
Shank Diameter (DCON) (Fractional Inch) | 1/4 |
Tool Length | Regular |
Centerline (α) Angle (Degree) | 3.0 |
Tip Radius (RE) (Decimal Inch) | 0.0625 |
Tip Radius (RE) (mm) | 1.59 |
Cutting Diameter (DC) (Decimal Inch) | 0.1250 |
Cutting Diameter (DC) (Fractional Inch) | 1/8 |
Cutting Diameter (DC) (mm) | 3.18 |
Coating Description | TiN (Ti-NAMITE) |