b'FRACTIONALM2M2CR3xD30 POS12 2LFAPMXM2M2CRDCON New Expanded Tools3xD DC TOLERANCES(inch)FRACTIONAL SERIES RE .004.120DIAMETERDC=+0.000/0.001 Two flute design isinch EDP NO. DCON = h 6ideal for softer alloyed,CUTTING SHANK LENGTH OVERALL CORNERRE=+0.0000/0.0005non-ferrous materialDIAMETER DIAMETEROF CUTLENGTH RADIUSUNCOATEDTI-NAMITE-Aapplications that requireDC DCON APMX LF RE (AlTiN) slotting or involve heavy0.004 1/8 0.012 1-1/204005 04001 STEELSchip loads. Enhanced corner0.005 1/8 0.015 1-1/200811 02275 STAINLESS STEELSgeometry with tight0.006 1/8 0.018 1-1/200812 02276tolerance corner radii0.007 1/8 0.021 1-1/200813 02277 CAST IRON Proprietary coating allows for superior chip0.008 1/8 0.024 1-1/200814 02278 HIGH TEMP ALLOYSflow, driving industry0.009 1/8 0.027 1-1/200815 02279 TITANIUMleading productivity and value, even at low0.010 1/8 0.030 1-1/200816 02280spindle speeds. 0.011 1/8 0.033 1-1/200817 02281 HARDENED STEELS High performanceNON-FERROUScarbide substrate0.012 1/8 0.036 1-1/200818 02282designed specifically for0.013 1/8 0.039 1-1/200819 02283 PLASTICS/COMPOSITESMicro Tool applications. Broad portfolio, offering0.014 1/8 0.042 1-1/200820 02284consistent lengths of cut,0.015 1/8 0.045 1-1/200821 02285to ensure application demands are met. 0.015 1/8 0.045 1-1/2 0.003 08501 08642 Advanced geometries0.016 1/8 0.048 1-1/200822 02286that extend tool life,0.017 1/8 0.051 1-1/200823 02287reduce chatter, cut cycle times, and improve part0.018 1/8 0.054 1-1/200824 02288quality. 0.019 1/8 0.057 1-1/200825 02289 All tools in stock to meet customer order0.020 1/8 0.060 1-1/200826 02290requirements. 0.020 1/8 0.060 1-1/2 0.003 08503 08644 All micro tools are0.020 1/8 0.060 1-1/2 0.005 04020 04021manufactured in accordance with the0.021 1/8 0.063 1-1/200827 02291KSPT ISO certified quality procedures. 0.022 1/8 0.066 1-1/200828 022920.023 1/8 0.069 1-1/200829 022930.024 1/8 0.072 1-1/200830 022940.025 1/8 0.075 1-1/200831 022950.025 1/8 0.075 1-1/2 0.005 04022 040230.025 1/8 0.075 1-1/2 0.010 08506 086470.026 1/8 0.078 1-1/200832 022960.027 1/8 0.081 1-1/200833 022970.028 1/8 0.084 1-1/200834 022980.029 1/8 0.087 1-1/200835 022990.030 1/8 0.090 1-1/200836 023000.030 1/8 0.090 1-1/2 0.010 08508 086490.031 1/8 0.093 1-1/200837 023010.032 1/8 0.096 1-1/200838 023020.033 1/8 0.099 1-1/200839 02303continued on next page14 END MILLS END MILLSwww.sgsmicrotools.com'